DELTA-DC 4071: It is cost-effective anionic wetting and dispersing additive for use in low- or high-polar systems as well as water-based coatings and printing inks.

It is an effective anti-settling agent in wash and shop primers, nitrocellulose primers, primer surfacers and aqueous stains as well as in water-based inks.

DELTA-DC 4071 can be considered as a cost-effective environmentally friendly replacement for APEs (Aryl Phenyl Ethoxylates).

DELTA-SC 2570: DELTA-SC 2570 is silicone-free surface control additive for aqueous systems.

It gives excellent leveling and anti-cratering properties in most aqueous resin systems with no inter-coat adhesion problems in multi-layer applications.

It is recommended for use in all kinds of water-based coatings and printing inks with a pH value superior to 7.5.  

DELTA-FC 1501 M: This is a new economical defoamer for emulsion paints. Though slightly cheaper than DELTA-FC 1501, DELTA-FC 1501 M can be considered a 1 to 1 replacement.

DELTA-DC 4211: DELTA-DC 4211 is a wetting and dispersing additive that is mainly recommended in highly filled unsaturated polyester systems (sheet and bulk moulding compounds, gelcoats and putties) or combination of polystyrene, polyvinylacetate and styrene-butadiene copolymers (e.g. LS- or LP-formulations). Using DELTA-DC 4211 leads to improved wetting and incorporation of extenders, reduced viscosity of the paste/compound and increased filler and extender load. Check out the technical bulletin in Technical Info to see some useful highlights.